See All Products
- Home
- >
- Products
The SA‐3VA is a multipurpose cutting machine, with a knife unit that can be adjusted for vertical and angular cutting. Cut at up to 55˚ on the left side and 60˚ on the right. The Vertical and Angle Cutting Machine is widely used in the upholstery industry, and can be designated for flexible, rigid, and specialty foam conversion—inquire today.
The SA-3VTS trimming station consists of four cutting units and a conveyor base to move the foam block forward and backward through the machine. Two cutting units trim away foam skin on two sides, then the top of the block. An additional vertical blade can split the block into smaller pieces during operation, and the fourth blade, with a 90˚-rotating head, can further process long blocks into shorter lengths.
The SA-5AF is Sunkist’s fully automatic peeling machine, designed to efficiently and effectively convert blocks of foam into rolls of foam sheets for sale or further processing. The upgraded blade can cut sheets as thick as 30mm while operating at high speed. The produced sheets are used widely from the footwear industry to the automobile industry.
The SA-7HA horizontally bores holes through foam blocks with a removable spindle that makes moving the foam from the boring to the peeling process more efficient and convenient. Horizontal boring reduces foam compression, ensuring smooth and even holes. Contact our Sales team today, and inquire about work surfaces to accommodate any shape block. Pair with our SA-5AF for best effect.
The SA‐9A completely recycles conversion plant foam waste by rebonding chips into blocks. Crushed foam enters the optional silo, then is distributed into the weight box. Set amounts enter the mixing tank, and then the two rectangle or cylinder molds for hot press and steam. Rebonded blocks can then be processed into numerous end products. Machine also includes an electric control panel with a built‐in weight display and metering system to control chemical and steam dosage.
The cross-type Block Cutter is a staple add-on of the continuous foaming machine. Synchronized with the speed of foaming, the SA-C1B follows the slabstock as it cuts perfectly perpendicular cross-sections by a vertical bandsaw. It can be used for both flexible and rigid foam. Inquire after our full foaming plant planning services today.
The guillotine-type Block Cutter is a staple add-on of the continuous foaming machine. Synchronized with the speed of foaming, the SA-C1G follows the slabstock as it cuts perfectly perpendicular cross-sections by a horizontal band knife. It can be used for both flexible and rigid foam. Inquire after our full foaming plant planning services today.